:	May 26, 2004

.

Disconnect the battery ground cable.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the RH exhaust manifold.

.

: Protect the engine during this operation. Remove the engine mount bracket.   Support the engine.   Remove the nut.   Remove the 4 bolts.

.

Remove the engine mount.   Remove and discard the 2 bolts.

.

Install the engine mount.   Clean the component mating faces.   Tighten the new bolts to 45 Nm (33lb.ft), then a further 60 degrees.

.

Install the engine mount bracket.   Clean the component mating faces.   Tighten the bolts to 80 Nm (59 lb.ft).   Remove the engine support.   Tighten the nut to 90 Nm (66 lb.ft).

.

Install the exhaust manifold.

.

Connect the battery ground cable.